8 Places to Soundproof Your Car, Ranked From Least to Most Effective


A lot of people spend hundreds of dollars covering their entire vehicle with sound deadening and end up disappointed. Not because the products don’t work, but because they focused on the wrong areas. That’s even more obvious now that more people drive EVs: take the engine noise away and you start noticing everything else. Tire noise, wind noise, road noise, and little rattles that were probably there all along.

I’ve tested sound deadening on trucks, SUVs and cars. Some upgrades make a noticeable difference. Others take a whole weekend, add a bunch of weight and barely change anything. Here are the 8 places, ranked from least to most effective, including a few that can beat sound deadening itself.

The ranking at a glance

RankAreaBest for
8Under the hoodOlder trucks and loud engines. Skip it on an EV
7RoofRain noise and panel vibration
6Trunk / cargo areaSUVs, hatchbacks and vans more than sedans
5DoorsRattles, vibration, speakers, that solid door feel
4FloorRoad noise. Big improvement, but a lot of work
3Wheel wellsRoad and tire noise, for little material and effort
2TiresOften beats sound deadening, especially on all-terrains
1Air leaks and door sealsWind noise and whistling. Cheap and overlooked

Before you start: 60–70% coverage and a clean surface

This applies to every area below. Don’t waste material covering every square inch. Focus on large flat panels and aim for about 60–70% coverage. And make sure the metal is completely clean and dry first, or the deadener won’t stick properly. A cleaning kit, an application roller and a clip removal tool with spare clips make the job a lot easier.

8. Under the hood

Underside of a car hood with insulation
Many newer vehicles already have a factory hood liner.

This one either makes sense for your vehicle or is almost a complete waste of time. On an older Toyota Tundra, sound deadening under the hood made a noticeable difference: the engine sounded less aggressive from the cabin and the whole truck felt more refined. On a Honda CR-V that already had a factory hood liner, the improvement was so small I wouldn’t have bothered if I’d known.

On an EV, this is the last place I’d spend money. There’s no engine noise to block. So ask yourself first: can I actually hear the engine while driving, and does it really bother me? If yes, it might be worth it. If you do it, the B-Quiet Hliner hood insulation is made for this.

7. The roof

Sound deadening mat applied to a large metal panel

The roof is one of the most overlooked panels in the vehicle, but it’s not a major source of highway noise for most people. Looking into EV and Tesla owner complaints, a lot of the noise isn’t coming through the roof at all. It’s wind moving around door seals, window seals, mirrors and the joints between panels. EVs are so quiet mechanically that people start noticing noises that were always there.

Where the roof really helps is rain noise and cutting the vibration of that big sheet of metal over your head. Otherwise, it’s not where I’d spend much time or money.

6. The trunk

Sound deadening mat installed across the floor of a vehicle cargo area

This depends a lot on what you drive. In a traditional sedan, the trunk usually isn’t a big noise source. I tried it on a Honda Accord and couldn’t hear much difference, because the seats, the metal structure, carpet and insulation all separate the cabin from the trunk. Deadening there mostly helps your sound system.

In a hatchback, SUV, crossover or van, the cargo area is basically part of the cabin. Focus on the large flat metal panels, the spare tire well, and especially around the rear wheel wells.

Free tip: a lot of rear-end rattles turn out to be the license plate, plastic trim, or loose tools. Empty the trunk and go for a drive before you buy anything. You might be surprised how much quieter it gets.

5. The doors

Removing an interior door panel to access the door cavity

Doors are the first place most people think of, and in a lot of older or entry-level vehicles they’re basically hollow metal shells with very little treatment from the factory. Deadening them absolutely helps, just maybe not the way people expect. For road noise, the doors usually aren’t where you’ll see the biggest improvement.

Where doors really shine is reducing vibration and rattles and improving the overall feel. That solid “thunk” when you close a luxury car door? A big part of that is what’s inside the door. And if you’re upgrading your speakers, this is one of the best places for sound deadening: a stiffer door means fewer rattles when the music’s playing. The SoundSkins Pro door kit is sized for this job.

4. The floor

Applying sound deadening mat to the vehicle floor with the seats removed
To do the floor properly, the seats come out and the carpet gets pulled back.

Now we’re getting into areas that make a real difference. If road noise is your biggest complaint, the floor is one of the first places I’d look. It’s the closest part of the cabin to the road. The downside: it’s one of the most labour-intensive jobs. Seats out, carpet back, everything cleaned before you apply anything.

Here’s what a lot of people don’t realize. The sound deadening mat most people install is mainly there to stop the metal vibrating. It works, but to actually block road noise, you want mass loaded vinyl on top.

Holding a roll of mass loaded vinyl
Mass loaded vinyl: a dense, heavy barrier that blocks sound.
  1. Sound deadening mat directly on the metal, to control vibration: Kilmat 80 mil (budget) or HushMat Ultra.
  2. Closed-cell foam between the layers, to separate them and cut squeaks and rattles: Noico Red 150 mil.
  3. Mass loaded vinyl on top, which does most of the actual sound blocking: Second Skin Luxury Liner Pro has the MLV and foam in one sheet.

MLV is more expensive, heavier and more work to install. The improvement can be significant. Getting there is the hard part, which is the only reason the floor isn’t ranked higher. If road noise is your biggest gripe, this is the best place to spend your time.

3. The wheel wells

Ever notice your vehicle is louder on rough pavement? A good part of that noise gets funnelled around the tire, into the wheel wells, and straight into the cabin. If someone with a newer vehicle told me they only wanted to tackle one area for road noise, the wheel wells would be near the top of my list.

Will it trap water and cause rust? No, as long as it’s done properly. Quality butyl sound deadeners are waterproof and won’t absorb water. The problem is installing over dirt, rust, oil or moisture. The surface needs to be clean, dry and rust-free first.

Spray-on sound deadener applied inside a wheel well
Spray-on deadener is built for areas exposed to water, salt and gravel.

How I’d do my own vehicle:

  • Pull the plastic wheel well liner (usually easy) and put mat on the metal behind it, where it’s protected.
  • Add some mat to the liner itself if it doesn’t have any.
  • Use a spray-on deadener like Boom Mat spray on the exposed areas.

It ranks this high because it’s right next to the source of the noise, it’s not much work, and it doesn’t take much material, so it’s not expensive.

2. Your tires

The tires are the only part of the vehicle touching the road, and some tires are dramatically louder than others. Sometimes you’ll notice on the drive home from the tire shop. Aggressive all-terrain and mud tires look great and work off-road, but those big tread blocks make constant noise on pavement.

If your vehicle spends most of its life on the road, a quieter touring tire can make a bigger difference than a lot of the sound deadening in this article. People compare tread life, snow and wet performance and price, but almost nobody checks cabin noise, which you’ll hear every single day. When you shop, read owner reviews specifically about noise. A lot of EV owners have learned this the hard way.

Also check your tire pressure. Over-inflated tires make the ride harsher and often noisier. It’s an easy one.

1. Air leaks and worn seals

Inspecting the rubber weatherstrip seal around a car door
Check every seal for tears, flat spots and places it’s pulling away.

The number one most overlooked way to make a vehicle quieter. It’s the same thing I always say about houses: sound takes the easiest path. A tiny opening around a door seal can be more noticeable than an entire untreated panel. That whistling noise? Most likely a torn seal around the windshield or one of the windows.

As a vehicle ages, the seals around the doors, windows, trunk, hatch and sunroof get dirty, dry out, flatten and stop sealing. Take a few minutes to inspect them all:

  • Damaged? Replace it. It’s easy and inexpensive.
  • Still in good shape? A silicone-based rubber conditioner keeps it flexible and stops it drying out early.
Can of silicone spray next to a car door seal

More car soundproofing

For a full walkthrough, see How to Soundproof a Vehicle Step by Step, and the vehicle section of my recommended products. Where is the noise in your vehicle coming from? Let me know in the comments on the video.

Jump to a part of the video

Products from the video

As an Amazon Associate I earn from qualifying purchases. Using these links supports Soundproof Guide at no extra cost to you.

Recent Posts