I Tested 3 Decibel Apps Against a $1,000 Sound Level Meter


If I seal a noisy door and my phone says the room got 5 decibels quieter, how much can I trust that number? I tested three iPhone apps against my calibrated sound level meter. One matched the meter to the decimal on the first test. Another read over 3 dB low both times, yet it came closest to measuring how much the volume changed.

How I tested the three apps

I put the iPhone beside my calibrated FDM-02 sound level meter, both the same distance from the TV, and played white noise. I set the TV volume to 30 for the first reading and 50 for the second. Those numbers are settings on my TV. The actual sound levels at the meter were about 77 and 82 dB.

I left each app at its default calibration. All three let you adjust the reading, but if you’re downloading an app to find out how loud your room is, you probably don’t have a calibrated meter sitting beside it. I wanted to see what you get as soon as you open the app.

What the phone and the meter actually read

I took a fresh reference reading for each app. That’s why the meter numbers vary slightly across the three runs. Each pair below shows the calibrated meter first and the phone second.

AppMeter / app at TV volume 30 (dB)Meter / app at TV volume 50 (dB)Average absolute error
NIOSH77.2 / 78.481.8 / 82.30.9 dB
Decibel X77.1 / 73.981.8 / 78.73.2 dB
SPL Meter77.1 / 77.181.6 / 81.20.2 dB

NIOSH Sound Level Meter

NIOSH Sound Level Meter app

The free NIOSH app read 78.4 dB when the meter showed 77.2. At the higher volume it read 82.3 against 81.8. Its display fluctuated, but both readings landed on the high side, by 1.2 and 0.5 dB. When I turned up the TV, the app registered a 3.9 dB increase against the meter’s 4.6 dB.

Decibel X

Decibel X app

Decibel X gave me the biggest reason to be careful about quoting a reading from my phone. At the lower volume it showed 73.9 dB while the meter showed 77.1. When I turned the TV up, the app showed 78.7 against 81.8. The display moved around, but the gap between the two instruments was remarkably consistent.

That consistency matters if you’re checking whether a soundproofing project helped. The calibrated meter picked up a 4.7 dB increase. Decibel X picked up 4.8. It missed the change by just 0.1 dB, the closest of all three apps on this test.

SPL Meter by Studio Six Digital

SPL Meter app

This app cost me about a dollar. At the first volume setting I could look from one display to the other and see exactly the same number, 77.1 dB. At the second, SPL Meter showed 81.2 while the reference showed 81.6. Its display was also steadier and easier to read. Across both readings its average error was just 0.2 dB.

It did well measuring the change, too. The app registered a 4.1 dB increase against the reference meter’s 4.5. That puts it between Decibel X and NIOSH for tracking the volume change, even though it finished first for the individual readings.

Which app would I use for a soundproofing project?

If I want to know the noise level in my room, I’d pick SPL Meter from these three. If I already had Decibel X on my phone and wanted to check a door seal before and after installation, I’d keep using it. A reading that’s consistently low can still tell me how much quieter the room got. NIOSH gave me a free option that averaged less than a decibel away from my meter.

For your own comparison, play the same sound at the same volume, put the phone in the same spot, and use the same app both times. Switching from SPL Meter before the job to Decibel X afterward could make it look like you knocked about 3 dB off the noise without doing anything to the door. These results came from one iPhone measuring white noise from the same TV at two levels. They give you a comparison for those conditions.

Watch a specific part of the test

Soundproofing products from the video description

As an Amazon Associate I earn from qualifying purchases. If you buy through these links, I may earn a commission at no extra cost to you. Thanks for supporting Soundproof Guide.

Need help with your soundproofing project?

If you’re trying to figure out where noise is getting in or what to try next, you can join Soundproof Guide on YouTube. I offer three membership tiers, from quick questions to one-on-one FaceTime support.

Recent Posts